SELF STICK membranes are self-adhesive waterproofing membranes used in Terraces, Basements, Bridges, Metal roofs, Floorings, and Sub-Structures. It can be applied to foundation walls, tunnels, earth sheltered structures and split slab construction.

SELF STICK membrane is 0.5mm, 1mm and 1.5 mm thick, 1.0 meter. wide and 15 meters. long and is supplied in rolls. It is unrolled sticky 1, side down onto concrete slabs or applied onto vertical concrete faces primed with SELF STICK primer Continuity is achieved by overlapping a minimum 50mm to 75 mm side lap & 100mm to 150mm end lap and firmly rolling the joint.

We also offer

SELF STICK bitumenous Primer which absorbs moisture and can be applied to green concrete & damp surfaces.

Double side self-stick membrane.

Protection Boards of thickness 1mm to 5mm and size 1meter x 2meters each.

Anti root SELF STICK membrane.

Colored top emulsions for SELF STICK top layer - Silver, Terracoat, Red, Green, and Blue.


Waterproof - high hydrostatic head resistance.

Cross-laminated film - provides.

Cold applied - no flame hazard; self-adhesive overlaps ensure continuity.

Chemically resistant - provides effective external protection against aggressive soils and groundwater.

Flexible-accommodates minor

Settlement & shrinkage movement.

Controlled thickness - factory made sheet ensures constant, non-variable site application.

Wide application window - SELF STICK is extremely flexible. It is capable of bridging shrinkage cracks in the concrete and will accommodate minor differential movement throughout the service life of the structure.

Surface Preparation:

Surfaces should be structurally sound and free of voids, loose aggregate, and sharp protrusions. Remove contaminants such as grease, oil, and wax from exposed surfaces. Remove dust, dirt, loose stone and debris. Protect SELF STICK membranes to avoid damage from other matters, construction materials or backfill.


SELF STICK membranes to be stored vertically in well covered and ventilated area not subjected to direct sunlight.

Physical Properties:

Property Arnica' Value Test Method
Color All colours
Roll Size, rats lx10 & lx15 UEAtc. M.O.A.T.30
Thickness, mm 1.0mm/20Kg.,1.5mrn/28Kg.,2mm/35Kg ASTM D3767
Softening Point. Deg C 110± 10°C ASTM D36
Tensile strength, membrane, Longarans. N/5cm 1000/1000 ASTMD412
Elongation >400%& >1500% [compound] ASTMD412
Tear Resistance 250 N ASTMD412
Crack cycling 100 cycles Unaffected ASTM C836
Lap adhesion, N/mm 2.2 ASTM D1876
Peel strength, N/mm 1.8 ASTM D903
Puncture resistance, N 250 N ASTM E154
Resistance to hydrostatic head 60 m (200 ft) of water ASTM D5385
Water absorption 0.1% maximum ASTM D570
Flexibility- bend over 25 mm mandrel[Oto-5°C] Unaffected ASTM D4586

*Tolerance limit of 5% to 20% is expected as per standards.